What types of aggregates are commonly used in building and landscaping?

Share this post

Table of contents

Let's work together

To get started, browse our online store or contact a member of our friendly team on 01202 579579.

As the leaves turn orange and the rain starts to feel a little more consistent, there is a shift in the type of work being done. Whether you are an individual doing some DIY or a tradesperson working on commercial projects, attention moves from gardening and landscaping to focusing on some foundational work such as driveways, masonry repairs or groundwork. This typically means we see an increase in the question “what types of aggregates are commonly used in building and landscaping?”

As raw materials that are either quarried or recycled, aggregates have many uses across a number of industries, but none more so than in the construction industry.

There are so many different types of aggregates, many of which also come in various sizes too. This means, you not only need to know what aggregates are most commonly used for your work, but also which type is the best to use.

In this article, we run through six of our most common aggregates used at this time of year for different types of projects.

The Six Most Commonly Used Aggregates

Having sold aggregates for over 30 years, we have noticed a pattern for which aggregates are commonly used and what they are used for.

Here are our top six best sellers throughout the autumn each year.

1. Type 1 Limestone and Recycled Type 1

What is it:

Type 1 Limestone and its slightly cheaper alternative Recycled Type 1 are crushed stone with particles that typically range from 40mm down to dust.

It is worth noting here that Type 1 Limestone is a primary material, meaning it is quarried, while Recycled Type 1 is made from processing inert waste.

Type 1 Limestone

Typical uses:

These materials are typically used for driveway, patio and path sub bases. This is because the large stones interlock to provide load-bearing strength, while the dust size particles packs tightly, filling any gaps when vibrated or rolled.

DIY uses:

For DIYers, we typically see this material being used for preparing a garden path or patio.

Commercial uses:

Commercial uses of this aggregate often include preparing large driveways or hardstandings.

2. Sharp Washed Sand

What is it:

Sharp washed sand is a sand like material. However, it is coarse and gritty with slightly larger, angular grains.

It goes through a process of rinsing and washing to remove dust, clay, silt and other impurities. This aggregate compacts well, but it leaves pores between grains meaning it drains well.

Typical uses:

Sharp washed sand is often an ingredient in concrete and screed. It is also used as a stable base layer under patios or flagstones.

Not to forget that during the wetter months, it is a good aggregate to put over a lawn to help reduce flooding.

DIY uses:

As we mentioned above, this aggregate is a common one for reducing flooding, so many DIYers buy it during autumn and mix it with clay-heavy soil to help drainage.

It is also often used under paving slabs and patios as a bedding layer, helping to keep the slabs level over time.

Commercial uses:

One of the biggest commercial uses of this aggregate is in concrete mixtures for foundations, floor slabs and driveways.

It is also used around pipes and cable bedding to protect the utility trenches, water pipes, electrical ducts and ground source heating loops.

3. Building Sand

What is it:

As the name suggests, building sand is construction sand. It is smooth, and quite fine with rounded grains.

Its texture and the shape of the grains differ from sharp washed sand, as these grains are rounded meaning they compact together more closely.

AMS Building Sand

Typical uses:

Typical uses of this aggregate include using it in mortar for bricklaying, block work or pointing.

DIY uses:

For a DIYer, this is a common aggregate used for repairing garden walls or for small bits of pointing if you are confident enough to have a go.

Commercial uses:

For those working in a commercial capacity, you are most likely to use this aggregate for bricklaying, or rendering fixtures and pointing.

4. All-in Ballast

What is it:

All-in ballast is a mixture of several various aggregates such as sharp washed sand, and a coarser aggregate such as gravel or crushed stone.

You can usually get it in two grades (sizes) AMS selling 10mm and 20mm all-in ballast.

Typical uses:

Similar to building sand, all-in ballast is used in concrete mixtures. However, this will only be for certain bases or foundations.

DIY uses:

Laying shed bases are a common autumnal activity using this aggregate for many DIYers.

Commercial uses:

Commercial projects that make use of this aggregate typically include patio and path foundations and wall foundations.

5. Recycled Tarmac

What is it:

Recycled tarmac is exactly what the name on the tin says. It is also known as Reclaimed Asphalt Pavement (RAP), and is old tarmacadam or asphalt that has been lifted from roads, driveways or pavements.

It goes through a screening and crushing process ready to be used again.

Recycled Tarmac loose aggregate

Typical uses:

Recycled tarmac makes a great sub base, often being used as a foundation for new roads or driveways.

It also comes in handy for farmers and those with some land, as it can also be used for farm tracks, haul roads, paths and a budget-friendly driveway.

DIY uses:

DIYers can use this common aggregate for creating or widening a driveway – perhaps they are creating a caravan slot in place of their front garden.

Commercial uses:

Commercial projects using recycled tarmac might include a sub-base for paving blocks or resin-bound driveways.

It can also be used on golf-course, parklands and public estates to create low-maintenance buggy paths, walking trails and maintenance lanes that endure the weather and help with erosion control.

6. Medium Washed Sand

What is it:

Medium washed sand is a graded sand that has been washed to remove unwanted fine particles, such as silt and clay. As the name suggests, the grains are a medium size, sitting somewhere between finer sands and coarser sharp sands.

The washing process helps produce a cleaner, more consistent material for applications where the sand specification matters.

Medium Washed Sand loose aggregate

Typical uses:

Medium washed sand is used in a range of construction and groundwork applications, depending on its grading and specification.

It can be suitable for certain pipe bedding, cable-laying and utility installation projects, where clean sand is required to surround and protect underground services.

DIY uses:

For DIYers, this aggregate can be useful for smaller garden projects involving drainage or the installation of underground services, provided the material is suitable for the job.

Commercial uses:

For commercial projects, medium washed sand is often considered for utility trenches, pipe bedding and other groundwork applications where a specified grade of sand is needed.

As with any aggregate used around underground services, the correct material will depend on the relevant project specification.

Choosing the Right Aggregate for Your Project

As you can see, there are several different types of aggregates that are common in construction and landscaping, and each has its own uses. So, how do you know which one is right for your project?

Whether you are a DIYer working on your garden or a tradesperson managing a larger commercial job, there are a few things worth considering before placing your order.

  • What are you using it for? This is the most important question to ask. For example, Type 1 limestone is commonly used to create a stable sub-base, whereas building sand is more suited to mortar for bricklaying and pointing.
  • How much do you need? For smaller projects, a bulk bag may be the most convenient option. For larger commercial projects, ordering a loose load may be more practical, depending on site access and the quantity required.
  • Does drainage matter? During autumn, wet weather can quickly expose problems with poorly prepared ground. Think about how water will drain from your project and whether the aggregate you choose is suitable for the intended application.
  • What does the project specification require? For commercial work, you may need to meet specific requirements for grading, strength, compaction or drainage. Always check these before ordering.

Getting the right aggregate from the start can help you avoid unnecessary costs, reduce waste and achieve a better result.

Ordering Aggregates from AMS

At AMS, we supply a range of aggregates for building, groundwork and landscaping projects, whether you are tackling a small DIY job at home or managing a larger commercial project.

From Type 1 limestone and recycled aggregates to building sand, ballast and washed sands, choosing the right material is an important first step towards getting your project off to a good start.

If you are planning some autumn building or landscaping work, take a look at our bagged and loose aggregates range to see what is available. All our aggregates can be delivered directly to your site or, if you have appropriate transport, you can collect the right aggregate from our Canford Inert facility.

Not sure which aggregate is right for your project, or how much you will need? Get in touch with the AMS team, and we can help you find the right material for the job.

Let's work together

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros ele.